Rear Panel Layout - R8A - Samson Rubicon R8a Owner's Manual

RearPanelLayout-R8a
1  R IBBONLEvEL – Four-position switch used
to adjust the high frequency response (in 2dB
increments).
2  v OLuME - Controls the amount of output level.
3  X LRINPuT - Balanced, +4dBu line level input is
connected here via standard XLR (microphone)
cable.
RubiconR8aLayout
4  P OWERSWITcH – Main power switch.
5  A cINLET - Connect the supplied IEC power
cable here.
6   1 /4-INcHPHONE – Balance TRS (Tip, Ring,
Sleeve) 1/4-inch phone plug used to connect
balanced or unbalanced +4dBu line level signals.
7  R cA – Used to connect signals from unbalanced,
–10dBV devices.
5