Do you have a question about the SurroundBAR 3000 and is the answer not in the manual?
Questions and answers
Anibal
March 5, 2025
No puedo vincular barra **** sonido me puedes ayudar
1 comments:
Mr. Anderson
March 5, 2025
To connect the Polk Audio SurroundBAR 3000 soundbar:
1. Power Connection: Plug the soundbar into a wall outlet. 2. TV Connection: Use the provided 6' optical cable (Source 1) or an analog L/R audio cable (Source 2 & 3, not included) to connect the soundbar to your TV. 3. Subwoofer Connection: Plug the wireless subwoofer into a wall outlet. Ensure the channel ID switch on the subwoofer matches the one on the soundbar. 4. Remote Control Setup: Use the provided remote control or program the soundbar to respond to an existing remote. 5. Power On: Turn on the soundbar using the power button on the remote or the touch-sensitive buttons on the front panel.
This setup ensures the soundbar and subwoofer work wirelessly, providing easy installation.
SurroundBar MUTE SOURCE Remote Control 6' Digital (Optical) Cable Wireless Subwoofer Digital One-Step ™ Contents • Contenido 1/8" to 1/8" Analog Cable Important Notes • Notas importantes Note: Remove caps prior to inserting cable (recommended hookup only). Nota: Si es necesario, quite la tapa antes de insertar el cable (sólo conexión recomendada).
This device complies with Part 15 of the FCC Rules. Operation |is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class B digital apparatus complies with Canadian ICES-003.
TV or Cable/Sat Box SurroundBar 3000 HEADPHONE OUTPUT POWER SOURCE 2.5A CHANNEL ID 1 2 3 4 FACTORY USE ONLY OPTICAL AUDIO OUTPUT CHANNEL ID POWER CHANNEL ID 1 2 3 4 POWER LINK PROTECT CHANNEL ID AV INPUT 100V - 240V...
Tap “Volume Up” button on your TV’s remote control 4 - 8 times, once per second. Tap, do not hold. LED blinks with each button press When the LED blinks green quickly for 3 seconds, the command has been learned. The LED will become solid green.
Need help?
Do you have a question about the SurroundBAR 3000 and is the answer not in the manual?
Questions and answers
No puedo vincular barra **** sonido me puedes ayudar
To connect the Polk Audio SurroundBAR 3000 soundbar:
1. Power Connection: Plug the soundbar into a wall outlet.
2. TV Connection: Use the provided 6' optical cable (Source 1) or an analog L/R audio cable (Source 2 & 3, not included) to connect the soundbar to your TV.
3. Subwoofer Connection: Plug the wireless subwoofer into a wall outlet. Ensure the channel ID switch on the subwoofer matches the one on the soundbar.
4. Remote Control Setup: Use the provided remote control or program the soundbar to respond to an existing remote.
5. Power On: Turn on the soundbar using the power button on the remote or the touch-sensitive buttons on the front panel.
This setup ensures the soundbar and subwoofer work wirelessly, providing easy installation.
This answer is automatically generated