Do you have a question about the SURROUNDBAR3000 and is the answer not in the manual?
Questions and answers
Anibal
March 5, 2025
Puedo utilizar cualquier subwoofer de la marca Polkaudio para una barra de sonido polkaudio 3000
1 comments:
Mr. Anderson
March 5, 2025
No, the Polk Audio SurroundBar 3000 uses a specific wireless subwoofer designed to work with it. Other Polk Audio subwoofers may not be compatible.
This answer is automatically generated
Danny Kellley
February 11, 2025
I had a power outage n now it slowly flashes orange on power button how can I reset it I tried unplugging didn't work
1 comments:
Mr. Anderson
February 12, 2025
To reset the Polk Audio SURROUNDBAR3000, turn the bar off so its status light is solid red. Then, press and hold the "learn" button on the bar until the status light in the middle flashes orangey-green twice. This will erase the bar’s memory and restore it to factory default settings.
14. Power Lines. An outside antenna system should not be located in the vicinity of overhead Audio Importer/Distributor in your country. A listing of Polk Audio Importer/ power lines or other electric light or power circuits, or where it can fall into such power lines Distributors can be found on the Polk Audio website www.polkaudio.com or...
PLEASE TAKE INVENTORY INSIDE YOUR SURROUNDBAR 3000 IHT CARTON: Please check to ensure you have everything in your Polk Audio ® SurroundBar ® 3000 Instant Home Theater ™ (IHT) carton. Inside, you should find: SurroundBar Subwoofer Subwoofer Power Cord 20V Power Supply...
NOTE: You’ll probably never need to adjust these switches. If you put more than one SurroundBar 3000 IHT system in your home, use different channel ID switch settings so the systems don’t interfere with each other. Polk Audio Customer Service 800-377-7655 (Outside USA & Canada: 410-358-3600)
REMOTE CONTROL 1. Power ( )—Turns on the bar or puts it in standby mode. 2. Mute—Mutes the sound coming from the SurroundBar 3000 IHT. 3. Source 1, 2 or 3—Changes which input source you are listening to. 4. Volume Up and Down ( + / – )—Adjusts the volume of the SurroundBar 3000 IHT.
Page 6
And that’s it. Here’s a little trick: If you place your subwoofer in a corner of your room, it will reinforce the subwoofer’s output, making it sound louder. Polk Audio Customer Service 800-377-7655 (Outside USA & Canada: 410-358-3600)
HOW TO CONNECT YOUR BAR This is really easy, too. You probably have two sources for a signal: your TV or a cable/satellite TV box. We recommend you use the optical output from your TV so you can enjoy the highest quality audio for TV and DVD’s. In the event that your TV does not have an optical output, you can use the optical output from your cable/satellite box and then connect your DVD player using one of the other...
NOTE: This procedure removes ALL of your bar’s remote control programming. If you only need to change the programming for some of the bar buttons, follow the three steps in the sequence previously described to redo any previous programming. Polk Audio Customer Service 800-377-7655 (Outside USA & Canada: 410-358-3600)
TROUBLESHOOTING Bass output is not loud enough. The bar does not power on. Turn up the subwoofer’s volume control using Ensure you have plugged the power supply the remote control. into a live wall outlet. Place the subwoofer closer to a corner of the room. Ensure that all components of the power Move subwoofer closer to viewing location within the room.
If you have a question or comment, please feel free to call to your SurroundBar 3000 and make sure any audio us or email us. In North America and Canada, call Polk Audio processing is turned off. Customer Service: 800-377-7655 (M-F 9-6 EST) or via email Why can’t I successfully program the SurroundBar 3000...
Page 11
Polk Audio loudspeakers and subwoofers are capable of playing at extremely high volume levels, which could cause serious or permanent hearing damage. Polk Audio, Inc. accepts no liability for hearing loss, bodily injury or property damage resulting from the misuse of its products.
In no event will Polk Audio, Inc. be liable to you for any incidental or consequential damages arising out of the use or inability to use the Product, even if Polk Audio, Inc., or a Polk Audio Authorized Cette garantie sera annulée si le numéro de série sur le produit a été enlevé, altéré ou falsifié. Cette Dealer, has been advised of the possibility of such damages, or for any claim by any other party.
Need help?
Do you have a question about the SURROUNDBAR3000 and is the answer not in the manual?
Questions and answers
Puedo utilizar cualquier subwoofer de la marca Polkaudio para una barra de sonido polkaudio 3000
No, the Polk Audio SurroundBar 3000 uses a specific wireless subwoofer designed to work with it. Other Polk Audio subwoofers may not be compatible.
This answer is automatically generated
I had a power outage n now it slowly flashes orange on power button how can I reset it I tried unplugging didn't work
To reset the Polk Audio SURROUNDBAR3000, turn the bar off so its status light is solid red. Then, press and hold the "learn" button on the bar until the status light in the middle flashes orangey-green twice. This will erase the bar’s memory and restore it to factory default settings.
This answer is automatically generated