Polk Importer/Distributor in your country. A listing of Polk Audio Importer/ Distributors can be found on the Polk 15. Overloading. Do not overload wall outlets and extension cords as this can result website www.polkaudio.com or by contacting Polk Audio at: 5601 Metro Drive,...
Online Registration Card Important Note: If anything is missing or damaged, or if your Polk Audio SurroundBar 9000 IHT fails to operate, please notify INSIDE YOUR SURROUNDBAR 9000 IHT CARTON: your dealer immediately. We recommend keeping your original carton and packing materials in case you need to ship the unit in the future.
7. Power Connection—The bar power supply connects here. have been successfully erased. 8. Audio Inputs (Source 1, 2, 3 or 4)—Where you connect your TV (or other sources) to the SurroundBar 9000. SOURCE LED Use the 6' optical cable provided (Source 1 or 2 are digital) or 1/8"...
)—Turns on the bar or puts it in standby mode. 2. Mute—Mutes and unmutes the sound coming from the SurroundBar 9000 IHT. 3. Source 1, 2, 3 or 4—Changes which input source you are listening to. 4. Volume Up and Down ( + / – )—Adjusts the master volume of the SurroundBar 9000 IHT system.
And that’s it. Here’s a little trick: If you place your subwoofer in a corner of your room, it will reinforce the subwoofer’s output, making it sound louder. Polk Audio Customer Service 800-377-7655 (Outside USA & Canada: 410-358-3600)
SYNCING THE BAR AND WIRELESS SUBWOOFER The SurroundBar 9000 bar and wireless subwoofer come from the factory preset to work together. If the wireless subwoofer stops receiving an audio signal, follow these instructions to re-establish the connection.
The setting to turn off your TV’s internal speakers should be here. If you can’t turn off your TV internal speakers, don’t worry. Your SurroundBar 9000 IHT will make your TV sound much better. To enjoy the best performance from your bar, you’ll want it to play louder than your TV.
HOW TO SET UP A REMOTE CONTROL FOR YOUR SURROUNDBAR IHT Tap “Volume Up” button on your TV’s remote control 4 - 8 times, once per second. Tap, do not hold. SMARTBAR ™ PROGRAMMING NOTE: For your SurroundBar to respond to your remote control, you MUST FIRST program the bar to respond to your television’s original IR (Infra-Red) remote.
Disable this processing. The included remote control won’t work. Ensure the battery’s protective plastic tab has been removed. Replace the battery (CR2025). Polk Audio Customer Service 800-377-7655 (Outside USA & Canada: 410-358-3600)
If you have a question or comment, please feel free to call or distorted, then check the audio menus of whatever us or email us. In North America and Canada, call Polk Audio source(s) are connected to your SurroundBar 9000 Customer Service: 800-377-7655 (M-F 9-5:30 EST) or via email and make sure any audio processing is turned off.
System and the microwave oven. WARNING: LISTEN CAREFULLY Polk Audio loudspeakers and subwoofers are capable of playing at extremely high volume levels, which could cause serious or permanent hearing damage. Polk Audio, Inc. accepts no liability for hearing loss, bodily injury or property damage resulting from the misuse of its products.
été autorisé ou approuvé par Polk Audio. out of the use or inability to use the Product, even if Polk Audio, Inc., or a Polk Audio Authorized Dealer, has been advised of the possibility of such damages, or for any claim by any other party. Some Cette garantie sera annulée si le numéro de série sur le produit a été...
5601 Metro Drive HBP2503B Baltimore, MD 21215...