Raise And Lower Monitor Screen; Screen Rotation - NEC MultiSync LCD1810 User Manual

E - 14
Figure I.1
Figure L.1
Figure L.1

Raise and Lower Monitor Screen

The monitor may be raised or lowered in either Portrait or Landscape
mode.
To raise or lower screen, place hands on each side of the monitor and
lift or lower to the desired height (Figure RL.1).

Screen Rotation

Before rotating, the screen must be raised to the highest level to avoid
knocking the screen on the desk or pinching your fingers.
To raise the screen, place hands on each side of the monitor and lift up
to the highest position (Figure RL.1).
To rotate screen, place hands on each side of the monitor screen and
turn clockwise from Landscape to Portrait or counter-clockwise from
Portrait to Landscape (Figure R.1).
To toggle the orientation of the OSM menu between Landscape and
Portrait modes, press the RESET button while OSM menu is off.
78133813.PM5
HS/CS
VS
R
G(/SYNC)
B
Power
Clip
Button
A
Figure J.1A Figure J.1B
Figure J.1A Figure J.1B
32
Installation
Figure K.1
Figure K.1
Clip
B
99.11.10, 1:40 PM