RAM 2012 Truck Chassis cab Owner's Manual page 35

2. Fasten your seat belt. (Fastening the seat belt will
cancel any chimes that may be confusing during this
programming procedure.)
3. Insert the Key Fob into the ignition.
4. Within 15 seconds, cycle the Key Fob from the OFF
position to the ON/RUN position a minimum of five
times, ending in the ON/RUN position. (Do not start the
engine).
5. Within 30 seconds, press the driver's door UNLOCK
switch.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33
6. A single chime will sound to indicate the feature has
been changed.
7. Repeat the above steps to alternate the availability of
this feature.
8. If a chime is not heard, the program mode was
canceled before the feature could be changed. If neces-
sary, repeat the above procedure.
NOTE: Use the Auto Unlock Doors feature in accor-
dance with local laws.
2