Routing Exercises - TC Electronic FireworX User Manual

EFFECTS SETUP
Exercise 7:
Inserting an Effect
There are two ways of inserting an effect. Let's start by setting
up a Phaser and after that a Delay
- Press the Effects key (if you are not already there).
- Use the < > Arrow keys to select the Routing page.
- Use the Parameter wheel to place the cursor in
the 1 1 position (position is indicated in the lower right
corner of the Routing display).
- Dial the Value wheel until you see "Filter - Phaser" in
the lower text line of the display and press Enter to
insert the Phaser in the Routing.
And the other way after accessing the Routing page:
- Place the cursor in position 2 1 in the Routing display
- Double click the Delay Mute key, Dial the Value
wheel until you see "Delay 1 - One-tap" in the lower
text line of the display.
- Press Enter to confirm.
You now have a Delay block set in series with a Phaser.
Exercise 7:
Inserting an effect
Press the Effects key
Use the Arrow
keys to select
the Routing
display
Double click
the Mute key of
the block you
want to insert
Dial Value
wheel to select
sub-algorithm
Press Enter to insert
the block
24
Effects
EFFECTS
DELAY
ENTER
Exercise 8:
How to change a sub-algorithm
The Delay that you just inserted is a One-Tap Delay that contains
only one delay time. Let's try to find a delay with two delay
times so we can get it different in left and right:
- Move the cursor to the Delay block using the
parameter wheel.
- Dial the Value wheel until you see "Delay - Dual" in
the lower text line.
- Press Enter to confirm.
You now have a Dual delay algorithm, where you are able to set
different delay times in left and right channels (remember to set
the panning of the two delay taps).
Exercise 8:
How to change a sub-algorithm
Select the Routing page
Dial Parameter
wheel to select
effect block
Dial
Value wheel
to select new
sub-algorithm
Press Enter to confirm
ENTER