Important Safety Instructions - OTMT SC4 User Manual And Installation Manual

Common sense and caution are factors which cannot be built into any product. These factors
must be supplied by the operator.
PLEASE REMEMBER:
1. When using electric tools, machines or equipment, basic safety precautions should
always be followed to reduce the risk of fire, electric shock, and personal injury.
2. Keep work area clean. Cluttered areas invite injuries.
3. Consider work area conditions. Do not use machines or power tools in damp, wet or
poorly lit locations. Don not expose equipment to rain, keep work areas well lit. do not
use tools in the presence of flammable gases or liquid.
4. Keep children away; all children should be kept away from the work area.
5. Guard against electric shock. Prevent body contact with grounded surfaces such as
pipes, radiators, ranges and refrigerator enclosures.
6. Stay alert. Never operate a power tool if you are tired.
7. Do not operate the product if under the influence of alcohol or drugs. Read warning labels
on prescriptions to determine if your judgment or reflexes might be impaired.
8. Do not wear loose clothing or jewelry as they can be caught in moving parts.
9. Wear restrictive hair covering to contain long hair.
10. Use eye and ear protection. Always wear.
11. Keep proper footing and balance at all times.
12. Do not reach over or across running machines.
Before operations
1. Be sure the power switch is OFF when not in use and before plugging in.
2. Do not attempt to use inappropriate attachments in an attempt to exceed the tool's
capacity.
3. Check for damaged parts before using the machine. Any part that appears damaged
should be carefully checked to determine that it will operate properly and perform its
intended function.
4. Check for alignment and binding of all moving parts, broken parts or mounting fixtures
and any other condition that may affect proper operation. Any part that is damaged
should be properly repaired or replaced by a qualified technician.
5. Do not use the machine if any switch does not turn off properly.
Operation
1. Never force the machine or attachment to do the work of a larger industrial machine. It is
designed to do the job better and more safely at the rate for which it was intended.
2. Always unplug the cord by the plug. Never yank the cord out of the wall.
3. Always turn off the machine before unplugging.
PDF created with pdfFactory Pro trial version

IMPORTANT SAFETY INSTRUCTIONS

4
www.pdffactory.com