Cutting Fluid - OTMT SC4 User Manual And Installation Manual

Item #

Cutting Fluid

For many lathe operations, cutting fluid is used
to reduce friction and improve chip clearance.
Proper use of cutting oil will extend tool life,
reduce stress on the lathe and improve the
quality of the cut surface. Modern cutting fluids
are specially formulated for specific metals and
operations. For most lathe work, a general-
purpose cutting fluid such as Tap-Magic
Tapmatic is appropriate.
Tap Magic Cutting Oil
Item #
PDF created with pdfFactory Pro trial version
Safety shield
99-003-525
81-002-914
www.pdffactory.com
Tapmatic
When machining
formulated cutting fluid such as Tap-Magic
Aluminum will give superior results. It helps
prevent chips from welding to the cutting edges
of the tool – a common problem when
machining aluminum.
or
Tap Magic Aluminum
17
Cutting Fluid
Item # 81-007-050
aluminum, a
Item # 81-002-928
specially