Location; Features - Haier PBFS21 Series Owner's Manual

Haier refrigerator owner manual
Hide thumbs Also See for PBFS21 Series:
Table of Contents

Advertisement

Location

The position of the refrigerator should
be far away from heat source and
the refrigerator should avoid sunlight
point-blank, in case the working
performance of the refrigerator may be
The Emendation of the Refrigerator Body
and steady ground, and if the refrigerator
needs to be blocked up, a place that is
steady, solid, and incombustible should
be chosen, and don't use the package
foam underlay of the refrigerator to block
up the refrigerator. If the refrigerator is
can be adjusted, so that the height of the
refrigerator can be increased; circumvolve
the bottom foot in an anticlockwise
direction, so that the height of the
refrigerator can be reduced.

Features

2. Independent ice-taking room
The ice-taking room is pulled out independently, so that the ice-taking becomes convenient.
5. Wind-curtain technology
In the front of the top area of the refrigerant room the wind-curtain technology is used, so that the cold
air loss can be reduced, and it can also make the cold air distribution is more balanced, In order to
assure the freshness of the food.
6. pre-refrigeration before defrosting
Before defrosting, the refrigerator inside temperature is judged, and pre-refrigeration is done, so that
the temperature before deepfreeze refrigeration and the temperature after deepfreeze refrigeration
cannot differ a lot, and this is for the purpose of the freshness of food and will prevent the temperature in
deepfreeze refrigeration increasing.
8. Door-opening warning.
The temperature is between -19 and 14 F, and has a function of changing temperature immediately
without refrigeration.
Don't place the refrigerator at a wet
and easy-sprinkled place, and the
sprinkled water and the feculence
should be cleaned with a soft cloth.
Parallel of the Door Bodies
If the heights of two door bodies
are not in symmetry, please make
the door bodies be in symmetry
a c c o r d i n g t o t h e f o l l o w i n g
descriptions.
1.At the place of the inter-space
gemel, Lift the door to be lifted with
one hand.
2.Insert the forceps into the ouch
with anther hand, as shown in the
3.Insert the other ouches until the
door bodies are parallel. (Three
ouches are provided together with
the product.)
3
The refrigerator should be placed
a place that is draughty and near a
drinking water source, and the around
the refrigerator including the back of
the refrigerator should be some room
of 1 inch.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents