Installation Requirements; Location Requirements; Electrical Requirements - Haier HRB15N3 Installation And User Manual

INSTALLATION REQUIREMENTS

LOCATION REQUIREMENTS

WARNING
Explosion and Fire Hazard
Keep flammable materials and vapors, such as gasoline,
away from appliance.
Failure to do so can result in death, explosion or fire.
IMPORTANT: This refrigerator is designed for indoor,
household use only.
To ensure proper ventilation for your refrigerator, allow
for 1" (2.54 cm) of space on each side and at the top. Allow
for 2" (5.08 cm) of space behind the refrigerator. When
installing your refrigerator next to a fixed wall, leave 4" (10
cm) minimum to allow for the door to swing open.
NOTE: This refrigerator is intended for use in a location
where the temperature ranges from a minimum of 55°F
(13°C) to a maximum of 110°F (43°C). The preferred room
temperature range for optimum performance, which
reduces electricity usage and provides superior cooling, is
between 60°F (15°C) and 90°F (32°C). It is recommended
that you do not install the refrigerator near a heat source,
such as an oven or radiator.
49-1000580 Rev. 0

ELECTRICAL REQUIREMENTS

Plug into a grounded 3 prong outlet.
Do not remove the ground prong from the power cord plug.
Do not use an adapter.
Do not use an extension cord.
Before you move your refrigerator into its final location, it is
important to make sure you have the proper electrical
connection.
Recommended Grounding Method
A 115 volt, 60 Hz, AC only 15- or 20-amp fused, grounded
electrical supply is required. It is recommended that a
separate circuit serving only your refrigerator be provided.
Use an outlet that cannot be turned off by a switch. Do not
use an extension cord.
NOTE: Before performing any type of installation or
cleaning, disconnect the refrigerator from the electrical
source. When you are finished, reconnect the refrigerator
to the electrical source and reset the temperature controls
to the desired setting.
READ AND SAVE THESE INSTRUCTIONS
WARNING
Electrical Shock Hazard
7