Haier PBFS21 Series Owner's Manual page 9

Connecting the Water Supply Line
7. Connect the pipe to the valve
Put the Tightened nuts and the copper shaft on the end side of the pipe and
connect the pipe to the stopping valve. Make sure that the pipe is cut into the
valve completely. Tighten and press the nut.
Standard. Saddle-backed is unlawful in Massachusetts and is forbidden. Please
consult the plumber's mate with working license.
8. Clean the Pipe
Power the main water supply till the water in the pipe becomes clean. Turn off the
water valve after having used water of about 1v.
9. Connect the pipe to the refrigerator.
Before connecting the pipe to the refrigerator, make sure that the power line is not cut into
the electric plug on the wall.
Note
(1) Tighten the water pipe on the water valve and take the nut off the water
pipe.
the water valve; tighten the water pipe using tightening nuts.
8