Using Wall Mount Unit - Casio IT-500 Series User Manual

Using Wall Mount Unit

The following procedure explains how to use the optional wall mount unit (DT-891WH)
to configure the Bridge Satellite Cradle/Bridge Basic Cradle for a wall-mounted
configuration.
1. Affix the wall mount unit to the bottom of the Bridge Satellite Cradle/Bridge Basic
Cradle, and secure it in place with the wall mount unit screws.
2. Drive one of the provided screws into the wall at the location where the upper hole of
the wall mount unit to be when you mount the unit on the wall.
Do not drive the screw into the wall all the way. Keep a space of about 2mm (
between the head of the screw and the wall surface.
3. Hook the upper wall mount unit hole onto the upper screw.
4. Drive the other screw into the wall at the location where the lower hole is located.
Screws
2mm
(1/8")
⁄
1
)
"
8
E-41