Table of Contents
Advertisement
Turning off Eye-Fi Card Communication (Eye-Fi)
Procedure
[MENU] * "¥ SETTING" Tab * Eye-Fi
Select "Off" to disable Eye-Fi card communication (page 156).
Configuring FlashAir Card Communication Settings (FlashAir)
Procedure
[MENU] * "¥ SETTING" Tab * FlashAir
Selecting "Start with the control image" for the FlashAir card setting and selecting
"On" for the camera's "FlashAir" setting will establish a FlashAir wireless LAN
connection (page 158).
• If the FlashAir card's "Start automatically at boot" setting is selected, a wireless
LAN connection will be established automatically whenever the camera is turned
on.
Configuring Camera Sound Settings (Sounds)
Procedure
[MENU] * "¥ SETTING" Tab * Sounds
Startup
Half Shutter
Shutter
Operation
Operation Vol
Playback Vol
• Setting a volume level of 0 mutes output.
Specifies the startup sound
Sound 1 - 5: Built-in sounds (1 through 5)
Off: Sound off
Specifies the sound volume. This setting is also used as the
audio level during video output (page 124).
Specifies the volume of movie audio output. This volume
setting is not used during video output (from the USB/AV port)
(page 124).
164
Other Settings (SETTING)
Advertisement
Table of Contents
