Table of Contents
Advertisement
Viewing Snapshots
Use the following procedure to view snapshots on the camera's monitor screen.
• For information about how to play back movies, see page 116.
• For information about images recorded using continuous shutter (CS), see page
118.
1.
Turn on the camera and press
[p] (PLAY) to enter the PLAY
mode.
• This will display one of the snapshots
currently stored in memory.
• Information about the displayed
snapshot also is included (page 13).
• You also can clear the information to
view only the snapshot (page 14).
• You can zoom in on the image by rotating the zoom controller towards z
(page 123). If you are recording a snapshot that is very important to you, it is
recommended that you zoom the image and check its details after recording it.
2.
Use [4] and [6] to scroll between images.
• Holding down either button scrolls at high speed.
NOTE
• Half-pressing the shutter button while in the PLAY mode or while a menu screen is
displayed will switch directly to the REC mode.
[6]
[4]
[p] (PLAY)
[6]
[4]
37
Quick Start Basics
Advertisement
Table of Contents
