Other Settings (Set Up); Adjusting Monitor Screen Brightness; Turning Off Eye-Fi Card Communication; Configuring Flashair Card Communication Settings - Casio EXILIM EX-TR200 User Manual

Other Settings (Set Up)

This section explains menu items that you can use to configure settings and perform
other operations in both the REC mode and PLAY mode.
For information about menu operations, see page 55.
Adjusting Monitor Screen Brightness (Screen)
Procedure
MENU * Setup * Screen
You can use the following procedure to change the brightness of the monitor screen.
With this setting, the camera detects available light levels and
Auto
automatically adjusts the brightness of the monitor screen accordingly.
Brightness that is greater than +1, which makes the screen easier to view.
+2
This setting consumes more power.
+1 Bright setting for outdoor use, etc. Brightness that is greater than 0.
0 Normal monitor screen brightness for indoor use, etc.
Screen brightness for viewing in a dark environment without disturbing
–1
others around you.
Turning off Eye-Fi Card Communication (Eye-Fi)
Procedure
MENU * Setup * Eye-Fi
Select "Off" to disable Eye-Fi card communication (page 89).
Configuring FlashAir Card Communication Settings (FlashAir)
Procedure
MENU * Setup * FlashAir
Selecting "Start with the control image" for the FlashAir card setting and selecting
"On" for the camera's "FlashAir" setting will establish a FlashAir wireless LAN
connection (page 90).
• If the FlashAir card's "Start automatically at boot" setting is selected, a wireless
LAN connection will be established automatically whenever the camera is turned
on.
94
Other Settings (Set Up)