Table of Contents
Advertisement
Turning off Eye-Fi Card Communication (Eye-Fi)
Procedure
[MENU] * "¥ SETTING" Tab * Eye-Fi
Select "Off" to disable Eye-Fi card communication (page 151).
Configuring FlashAir Card Communication Settings (FlashAir)
Procedure
[MENU] * "¥ SETTING" Tab * FlashAir
Selecting "Start with the control image" for the FlashAir card setting and selecting
"On" for the camera's "FlashAir" setting will establish a FlashAir wireless LAN
connection (page 153).
• If the FlashAir card's "Start automatically at boot" setting is selected, a wireless
LAN connection will be established automatically whenever the camera is turned
on.
Configuring Camera Sound Settings (Sounds)
Procedure
[MENU] * "¥ SETTING" Tab * Sounds
Startup
Half Shutter
Shutter
Operation
Operation Vol
Playback Vol
• Setting a volume level of 0 mutes output.
Specifies the startup sound
Sound 1 - 5: Built-in sounds (1 through 5)
Off: Sound off
Specifies the sound volume. This setting is also used as the
audio level during TV output (page 121).
Specifies the volume of movie audio output. This volume
setting is not used during TV output (page 121).
159
Other Settings (SETTING)
Advertisement
Table of Contents
