Power Activation Button On The Engine - Lionel The Polar Express Owner's Manual

Operating your train

Power activation button on the engine

P
ress the grey Power Activation button located on top of the boiler just in front of the cab
area of the engine. The light in the front of the engine and stationary sounds will come
on to indicate the train is operational. See Figure 7.
The engine power automatically turns off if not used after 10 minutes. When the
Note!
engine automatically time out into the off mode the light and stationary sounds
shut down off.
Just press the start button again to continue to play. Pressing the start button again will not shut the
train off. You can either let it time out for 10 minutes or if required, disconnect the power cord from
the back of the engine. Note the engine was designed to use the auto shut off to turn the engine
off. Very little power is used during the time out period if Wireless Controller is not activating any
operations. The stationary sounds and light will continue during this time out period until the engine
shuts off at the end of the ten minutes.
Figure 7. Power Activation Button
10