Table of Contents
Advertisement
CLEANING THE
MIRACLEAN® GRIDDLE
The surface of the MIRACLEAN
durable and with proper care, following the procedures
below, will last many years.
A sample of Keating Klenzer, Keating palmetto brush
and a 4" scraper are included with each new griddle.
1. Scrape MIRACLEAN
®
surface.
2. Clean your Miraclean
®
Griddle while hot at 300°F
to 350°F. Using a plastic
pitcher, pour water ahead
of a palmetto pot brush.
Then scrub the griddle
clean with the pot brush
sweeping the water into
the drain trough.
3. Sprinkle with Keating
Klenzer. Polish with a soft
cloth (towel). It will sparkle
like new in just a few min-
utes. Rinse with potable
water to remove excess
Keating Klenzer. Proper care should be taken to fully
clean the griddle on a regular basis.
CLEANING UTENSILS
Spatulas should be hand washed in
mild to medium strength detergent
and towel dried.
NOTE: Avoid contact with Chlorine or
bleach, it will discolor steel spatula.
Rubbing the spatula with vegetable
oil will slow discoloration.
Rinse scraper and carefully wipe
blade with a dry cloth. Cover blade
with plastic protection cover when
not in use.
Rinse Palmetto brush until clean.
CLEANING CONTROL PANEL
Clean any grease build-up on switches and thermostat
knobs.
NOTE: If grease gets into the working mechanism of
a switch or thermostat, it may cause the unit to fail.
GREASE BUILD-UP NEAR ANY OPEN FLAME IS A
FIRE HAZARD.
The front, back and sides of the cabinet should be kept
clean for sanitary reasons.
®
Griddle is very
The Miraclean
the MIRACLEAN
erties will last for many years.
Damage done to the Miraclean
SPATULA
SCRAPER
PREVENTIVE MAINTENANCE
Preventive maintenance should be done in daily, weekly,
monthly and yearly intervals as necessary. Following preven-
tive maintenance procedures will help keep your MIRA-
CLEAN
ing will lead to years of quality performance.
6
CLEANING CABINET
CARE OF THE MIRACLEAN® SURFACE
®
surface is very hard. With proper care,
®
surface and its unique cooking prop-
NEVER USE A GRIDDLE STONE, BRICK OR
SCREEN TO CLEAN THE MIRACLEAN
FACE. DAMAGE DONE TO THE MIRACLEAN
SURFACE BY GRIDDLE STONE, BRICK OR
SCREEN WILL VOID THE WARRANTY.
DO NOT HACK, CHOP, HIT OR CUT ON THE MIR-
ACLEAN
®
SURFACE. YOU WILL DENT THE
STEEL
PLATE
UNDER
CHROME. IT IS EVEN POSSIBLE TO HACK TWO
NICKS CLOSE TOGETHER AND ACTUALLY
TEAR THE MIRACLEAN
CHROMIUM WILL NOT STRETCH. PROPER USE
OF THE UTENSILS SUPPLIED WITH YOUR MIRA-
CLEAN
®
GRIDDLE WILL PREVENT SURFACE
DAMAGE. THE DAMAGE DONE TO THE MIRA-
®
CLEAN
SURFACE IS IRREPARABLE.
NEVER USE ICE TO COOL THE MIRACLEAN
SURFACE. USE OF ICE MAY WARP THE MIRA-
CLEAN
®
SURFACE.
USE ONLY KEATING SUPPLIED CLEANING
TOOLS AND KLENZER.
USE ONLY A KEATING STEEL SPATULA.
DO NOT WASH STEEL SPATULA WITH CHLO-
RINE OR BLEACH AS IT WILL DISCOLOR.
DO NOT CLEAN SCRAPER ON SPLASHBACK,
GREASE BUILD-UP WILL OCCUR WHICH MAY
RESULT IN A FIRE.
DO NOT OBSTRUCT THE FLUE. THE FLUE HAS
BEEN DESIGNED SPECIFICALLY TO EXHAUST
THE BY-PRODUCT OF ANY COMBUSTION. ANY
OBJECTS (STEAK WEIGHTS, EGG COVERS,
PANS, RAGS, UTENSILS, ETC.) PLACED ON THE
FLUE WILL INHIBIT THE PROPER COMBUSTION
AND EXHAUST, THEREFORE CAUSING HEALTH
HAZARDS.
DO NOT USE A POWER WASH, HOSE OR STEAM
CLEANER FOR DAILY CLEANING.
®
Griddle working efficiently. Proper care and servic-
®
surface is irreplacable.
®
SUR-
®
THE
TRIVALENT
®
SURFACE AS THE
®
Advertisement
Table of Contents
