On-Line Resources - MultiTouch MultiTaction Cell MT550 User Manual

On-line Resources

Calibration
Troubleshooting
Support
SDK Tutorials
https://cornerstone.multitouch.fi/sdk-tutorials/sdk-tutorials
display (OSD) mode. Once the OSD is visible on the Cell, the calibration mode
is entered by pressing 'd' on the keyboard. With the calibration mode enabled,
one can press shift+'c', to start the automatic calibration. During the automatic
calibration you should place the calibration sheet on top of the display.
The automatic calibration process takes at most 3 minutes, after which the cali-
bration sheet can be removed from the display.
For calibration instructions:
https://cornerstone.multitouch.fi/calibration
For troubleshooting instructions:
https://cornerstone.multitouch.fi/troubleshooting
For online support on MultiTouch Cells:
https://cornerstone.multitouch.fi/support-form
(requires logging in to the website)
For information regarding the SDK:
C
ALIBRATION
35