Vesa Mount Installation - MultiTouch MultiTaction Cell MT550 User Manual

VESA Mount Installation

The MultiTaction Cell complies with the VESA Mounting Interface Standard
(MIS-F) by having four screw holes of the VESA M8 MIS-F 800, 400, 8 type on
its back panel and can be installed to VESA Mounts.
Install the Cell to any pedestal or wall mount that conforms to the VESA
Mounting Interface Standard.
T
ASK
1. Locate the Standard M8 VESA Mount Screw holes on the back panel of the
Cell.
CAUTION: Heat build-up reduces the systems' life and can cause
hardware failure.
• Make sure that the cooling and air ventilation properties of the
installation location meet the requirements of the Cell.
VESA M I
OUNT NSTALLATION
15