Ventilation And Heat Control - MultiTouch MultiTaction Cell MT550 User Manual

Ventilation and Heat Control

Controlling the heat exposure of the Cell affects the lifetime and operating
safety of the device. To ensure proper heat control review the following check-
list.
Table 14: Heat Control Checklist
Heat control target
Ventilation
Operating temperature
External factors
Installation distances
V
ENTILATION AND
Correct status
The Cell is installed in a well-ventilated
environment and in a well-ventilated
enclosure (if enclosure is used). The device
is not covered with clothes, papers, props or
other materials which can prevent the
proper ventilation of the device.
Temperature is between the limits specified
on the Normal Operating Conditions.
There are no external factors heating the
Cell above the temperature limits. External
factors can include for example direct
sunlight, spotlights or other heat emitting
devices.
The minimum safety distances described on
the proper section of the chapter Installing
the Cell are followed.
H C
EAT ONTROL
14