Canon imageRUNNER 2320 User Manual page 107

Staple jam
Cause A staple jam may have occurred in the Finisher-U2.
Remedy Check if a staple jam has occurred. (See Chapter 7, "Troubleshooting," in the
Reference Guide.)
This func. requires Optional equipment.
Cause The
optional network kit.
Remedy To make the scanning function available, the optional network kit is required.
This size cannot be stapled
Cause The machine cannot staple the printouts because the selected paper size is
unavailable for stapling.
Remedy Use the suitable paper size for stapling. (See Chapter 2, "Advanced
Operations," in the Copying Guide.)
This size cannot be offset
Cause The machine cannot offset the printouts because the selected paper size is
unavailable for offset copying.
Remedy Use the suitable paper size for offset copying. (See Chapter 2, "Advanced
Operations," in the Copying Guide.)
Toner low/Prepare new toner
Cause Toner is running out.
Remedy Rock the toner cartridge to redistribute the toner evenly inside the cartridge. If
the message persists, install a new cartridge.
Tray A full/Remove paper
Cause Tray A is full of paper.
Remedy Remove the prints from Tray A. (See Chapter 5, "Optional Equipment," in the
Reference Guide.)
key has been pressed when the machine is not equipped with the
List of Error Messages
4
4-9