Legacy Usb Support - Toshiba M50 User Manual

To select the boot drive you want, follow the steps below.
1. Boot-up your computer and press F12 to enter the boot menu.
2. The boot select screen will be displayed: Hard Disk Drive, CD/DVD,
FDD, and LAN.
3. Use the upper/lower cursor keys to highlight the boot device you want
and press Enter.
Keyboard
Wake-up on Keyboard
When this feature is enabled and the computer is in Standby mode, you
can turn on the computer by pressing any key. It is effective only for the
internal keyboard and only when the computer is in standby mode.
Enabled
Disabled
USB

Legacy USB Support

Use this option to enable or disable legacy USB support. If your operating
system does not support USB, you can still use a USB mouse, keyboard,
and floppy diskette drive by setting the Legacy USB Support option to
enable.
LAN
Wake-up on LAN
This feature lets the computer's power be turned on when it receives a
wake-up signal from the LAN.
Enabled
Disabled
The Wake-up LAN function support AC adapter mode only, before you
plan to use this function please make sure your AC power source is
connected to system properly.
Do not install or remove an optional memory module while Wake-up on
LAN is enabled.
User's Manual
Enables the Wake-up on Keyboard feature.
Disables the Wake-up on Keyboard function
(Default).
Enables Wake-up on LAN.
Disables Wake-up on LAN (Default).
HW Setup
7-3