Toshiba M50 User Manual page 37

DC IN LED
Power LED
Battery LED
Hard Disk Drive LED
Wireless
Communication
Switch
Wireless
Communication LED
Microphone Jack
Headphone Jack
Volume Control
User's Manual
The DC IN LED indicates the computer is
connected to the AC adapter and it is plugged
into an AC power source.
In normal operating mode, the Power LED is
green. If the system is in Standby Mode the LED
will flash amber, while the LED will be off when
the computer is turned off or is in Hibernation
Mode.
The Battery LED indicates the battery's current
charge/discharge status. It lights green when the
battery is fully charged. It lights amber while the
battery is being charged from the AC adapter. It
flashes amber when the battery capacity is low.
The Hard Disk Drive LED indicates that the hard
disk drive is being accessed. Every time your
computer runs a program, opens a file, or
performs some other function in which it must
access the hard disk drive, this light will go on.
The wireless communication switch turns on the
wireless networking transceiver. The Wireless
Communication LED beside it indicates that
wireless networking is turned on.
(The availability of this function depends on the
model you purchased.)
Indicates whether the wireless LAN is active or
not.
(The availability of this function depends on the
model you purchased.)
The standard 3.5 mm mini microphone jack
enables connection of a three conductive type
mini-jack for a monaural microphone.
The headphone jack lets you connect stereo
headphones or other audio-output devices such
as external speakers. Connecting headphones or
other devices to this jack automatically disables
the internal speakers.
Use this dial to adjust the volume of the stereo
speakers or headphones.
The Grand Tour
2-2