Legacy Usb Support - Toshiba Satellite A350 Series User Manual

Keyboard
Wake-up on Keyboard
When this feature is enabled and the computer is in Sleep mode, you can
turn on the computer by pressing any key. It is effective only for the internal
keyboard and only when the computer is in Sleep mode.
Enabled
Disabled
USB

Legacy USB Support

Use this option to enable or disable USB Legacy Emulation. If your
operating system does not support USB, you can still use a USB mouse
and keyboard by setting the USB Legacy Emulation item to enabled.
Enabled
Disabled
USB Sleep and Charge function
This section describes the setting for USB Sleep and Charge function. For
more information, please refer to the
section in Chapter 4.
The default setting in BIOS Setup is [Disabled]. Changing the setting to
[Enabled] enables the use of this function.
There are two modes, Mode 1 and Mode 2 in [Enabled]. For normal use,
set the setting to Mode 1.
If the function does not work with Mode-1 setting, charge it to Mode-2.
Some external devices may not be able to use this function in either mode.
When this happens, change the setting to [Disabled].
Enabled (Mode 1)
Enabled (Mode 2)
Disabled
LAN
Wake-up on LAN
This feature lets the computer's power be turned on when it receives a
wakeup signal from the LAN.
User's Manual
Enables the Wake-up on Keyboard feature.
Disables the Wake-up on Keyboard function
(Default).
Enables the USB Legacy Emulation. (Default)
Disables the USB Legacy Emulation.
USB Sleep and Charge function
Enables Sleep and Charge function Mode 1.
Enables Sleep and Charge function Mode 2.
Disables Sleep and Charge function. (Default)
HW Setup and Passwords
7-4