Toshiba M50 User Manual page 66

Connecting
To connect the internal modem cable, follow the steps below.
■
In case of a lightning storm, unplug the modem cable from the
telephone jack.
■
Do not connect the modem to a digital telephone line. A digital line will
damage the modem.
1. Plug one end of the modular cable into the modem jack.
2. Plug the other end of the modular cable into a telephone jack
Do not pull on the cable or move the computer while the cable is
connected.
If you use a storage device such as an optical media drive or hard disk
drive connected to a 16-bit PC Card, you may find that the modem speed
is slow or the communication session might be interrupted.
If you find that the modem speed is low or communication is interrupted
when you are using the modem, please set the CPU speed to Maximum
within the TOSHIBA Power Saver utility.
Disconnecting
To disconnect the internal modem cable, follow the steps below.
1. Pinch the lever on the connector in the telephone jack and pull out the
connector.
2. Disconnect the cable from the computer in the same manner.
User's Manual
Connecting the internal modem
Operating Basics
4-5