Front Panel Functions - Adamson M Series User Manual

. Mute keys - Mute/Unmute input and output channels. When an input channel is muted, a red LED will come
on for indication.
2. Gain/Menu keys - Selects the corresponding channel for the LCD menu display and is acknowledged by a
green LED. The last modified menu will be displayed on the LCD. Linking multiple channels is accomplished by
pressing and holding the first channel key, then pushing the other desired channels. This eases programming for
same parameters across multiple channels. Multiple Inputs can be linked together and multiple outputs can be
linked together. Inputs and Outputs are linked separately.
. Peak Level LED - Indicates the current peak level of the Signal: Signal (-42dB), -2dB, -6dB, -dB, Over/Limit.
The Input Over LED references to the device's maximum headroom. The Output Limit LED references to the
threshold of the limiter.
4. LCD - Shows all the necessary information to control the unit.
5. Menu Control keys - There are 6 menu keys: <<Menu (Menu Down), Menu>> (Menu Up), <<Cursor (Cursor
Down), Cursor>> (Cursor Up), Enter/Sys/Speed and Exit. The functions of each key is explained below:
<<Menu: Previous menu screen
Menu>>: Next menu screen
<<Cursor: Previous cursor in the menu screen
Cursor>>: Next cursor in the menu Screen
Enter/Sys/Speed: Enter is used only in the System Menu to proceed with selected actions
Exit: Exit to the Main Menu
6. Rotary Thumb Wheel - Changes parameter data values. The wheel has travel velocity sensing which ease
large incremental data modifications. For modifying delay and frequency ( Hz resolution), pressing the Speed
key simultaneously will increment/decrement the data value by 00X.

.0 Front Panel Functions

Sys enters the System Menu from the main menu
Speed modifies delay and frequency ( Hz resolution mode) data values by
00X.
M Series Processor User Manual - Page 7 of 26