Adamson M Series User Manual page 13

XOver - Crossover parameters
OUT_1:XXXXXX MENU:XOver
FTRL:Off FTRH:Off
FRQL:1000Hz FRQL:1000Hz
SLPL:24dB SLPH:24dB
• FTRL - Filter Type of low frequency crossover point (high pass). Types can be Buttwrth (Butterworth), Link-Ri (Linkritz
Riley) or Bessel.
• FRQL - Filter cut-off Frequency of low frequency crossover point (high pass). Ranges from 20 to 20,000Hz in
either Hz steps or /6 octave steps. The frequency steps can be selected in the System Menu.
• SLPL - Filter Slope of low frequency crossover point (high pass). Ranges from 6 to 48dB/octave (48kHz) or 6 to
24dB/octave (96kHz) in 6dB/octave steps. If the selected Filter Type is Linkritz Riley, the available slopes are 2 / 24
/ 6 / 48 dB/octave (48kHz) or 2 / 24 (96kHz).
• FTRH - Filter Type of high frequency crossover point (low pass).
• FRQH - Filter cut-off Frequency of high frequency crossover point (low pass).
• SLPH - Filter Slope of high frequency crossover point (low pass).
6.2 Output Menus
M Series Processor User Manual - Page  of 26