Table of Contents
Advertisement
Security - Security Locks
The M Series Processor enables the user to secure the unit and prevent undesired changes in the setup. In order to
switch between the security level the user must enter the correct password.
SYSTEM-SETUP MENU:Security
MENU:In-Signal
LOCK:No
PASSWORD:XXXX
• MENU - Selects the menu to be locked/unlocked. The options are:
• In-Signal - Input Signal Menu (Level, Polarity, Delay).
• In-EQ - Input EQ Menu.
• In-Name - Input Channel Name Menu
• Out-Signal - Output Signal Menu (Level, Polarity, Delay).
• Out-EQ - Output EQ Menu.
• Out-Xover - Output Crossover Menu.
• Out-Limit - Output Limit Menu.
• Out-Source - Output Source Menu.
• Out-Name - Output Channel Name Menu.
• System - System Menu
• LOCK - Selects to lock (Yes) or unlock (No) the corresponding menu.
• PASSWORD – The password of the DLP-4080 is 4 characters in length. The user can change it via the PC
application software. The factory default of a new unit does not require a password.
6. System Menus
M Series Processor User Manual - Page 9 of 26
Advertisement
Table of Contents
