Input Menus - Adamson M Series User Manual

Each of the M Series Processor's input channels has a separate Menu key. There are  menus for each input
channel.
Signal - Signal parameters
IN_1:XXXXXX MENU:Signal
LEVEL:0.00dB
POL :+
DELAY:0 (000.000ms)
• LEVEL - Gain, -40.00dB to +5.00dB in 0.25dB steps.
• POL - Polarity, can be normal (+) or inverted (-).
• DELAY - Delay in 2us steps. Can be displayed in ms, ft or m. The time unit of the delay can be changed in the
System menu. The maximum delay permitted is 24,000 steps (500ms).
IN_1:XXXXXX MENU:EQ
EQ# :1 BW:0.33oct
LEVEL:0.00dB Q=4.36
FREQ :1000Hz TYPE:Param
• EQ# - Selects one of the 6 available Equalizers.
• LEVEL - EQ level gain. Ranges from -0.00dB to +5.00dB in 0.25dB steps.
• FREQ - EQ center frequency. Ranges from 20 to 20,000Hz in either Hz steps or /6 octave steps. The
sampling rate and the frequency steps can be selected in the System Menu.
• BW - EQ Bandwidth. Ranges from 0.02 to 2.50 octaves in steps of 0.0 octave steps for PEQ. The Q value is
automatically shown beneath the octave value. For Lo-Slf or Hi-Shf, it is either 6 or 2dB/Oct.
• Type - Type of EQ. The types can be parametric (PEQ), Lo-shelf (Lo-shf) and Hi-shelf (Hi-shf).
Ch-Name - Channel Name
IN_1:XXXXXX MENU:Ch-Name
NAME:XXXXXX
• Name - Channel name. It is 6 characters in length.

6. Input Menus

M Series Processor User Manual - Page  of 26