Determining Wall Plate Location Under Your Cabinet; Plate Position - Frigidaire FFMV162LSA Installation Instructions Manual

Installation Instructions
DETERMINING WALL PLATE LOCATION UNDER YOUR CABINET
Plate positionmbeneath flat bottom
cabinet
Plate positionmbeneath framed recessed
cabinet bottom
MountingPlateTabs
Touching the CabinetBottom
At least 30" (76.2cm),
up to 36" (9!.4 cm)
MountingPlateTabs
.Touchingthe BackFrame
i
I
I i i 30" (76,2 cm)
to Cooktop
Plate position_beneath recessed bottom
cabinet with front overhang
Mounting Plate with
Tabs Below Cabinet
Bottom the Same
Distance as the Front
Overhang Depth
30" (76,2 cm)
to Cooktop
!
Your cabinets may have decorative trim that
interferes with the microwave installation. Remove
the decorative trim to install the microwave properly
and to make it level.
THE MICROWAVE MUST BE LEVEL.
Use a level to make sure the cabinet bottom is level.
If the cabinets have a front overhang only, with no
back or side frame, install the mounting plate down
the same distance as the front overhang depth. This
will
[]
%
%
keep the microwave level.
Measure the inside depth of the front overhang.
Draw a horizontal line on the back wall an equal
distance below the cabinet bottom as the inside
depth of the front overhang.
For this type of installation with front overhang only,
align the mounting tabs with this horizontal line, not
touching the cabinet bottom as described in Step D.
7