Table of Contents
Advertisement
Installation Instructions
B._,.. OUTSIDE TOP EXHAUST (Vertical Duct)
INSTALLATION
OVERVIEW
B1. Attach
Mounting
Plate to Wall
B2. Prepare
Top Cabinet
B3. Adjust
Blower
B4. Check Damper
Operation
B5. Mount Microwave
Oven
B6. Adjust
Exhaust
Adaptor
B7. Connect
Ductwork
Blm ATTACH THE MOUNTING
PLATE
TO THE WALL
Attach the plate to the wall using toggle bolts. At least
one wood screw must be used to attach
the plate to a wall stud.
1. Remove
the toggle wings from the bolts.
2, Insert the bolts into the mounting
plate through
the
holes designated
to go into drywall and reattach
the toggle wings to 3_,, onto each bolt.
To use toggle bolts:
Mounting
Plate
_.
Spacing for Toggles More
Than Wall Thickness
i
i Toggle Wings
I
Wall
Bolt End
3, Place the mounting
plate against the wall and
insert the toggle wings into the holes in the wall to
mount the plate.
NOTE:
Before tightening
toggle
bolts and wood
screw,
make sure to coincide
bottom
line of the
Mounting
plate with Horizontal
line of "Rear wall
Template"
and then the Mounting
plate is properly
centered
under the cabinet.
CAUTION:
Be careful to avoid pinching
fingers
between
the back of the mounting
plate and the wall.
4. Tighten
all bolts. Pull the plate away from the wall
to help tighten the bolts.
14
Advertisement
Table of Contents
