Tools You Will Need; Mounting Space - Frigidaire LEVM30FE Installation Instructions Manual

Over the range microwave oven
Hide thumbs Also See for LEVM30FE:
Table of Contents

Advertisement

Installation Instructions
TOOLS YOU WILL NEED
Pencil
# 1 and #2 Phillips screwdriver
Ruler or tape measure
straight edge
Tin snips (for cutting
damper, if required)
Gloves
Scissors
(to cut template, if necessary)
Saw (saber, hole or keyhole)
Electric drill with
3/16",
1/2"
and 5/8" drill bits
Stud finder or Hammer (optional)
Carpenter square
4_ _
(optional)
_ _
J[
Filler blocks or scrap wood
pieces, if needed for top
cabinet spacing (used on
recessed bottom cabinet
installations only)
Safety goggles
Level
Duct and masking tape
MOUNTING SPACE
Bottom edge of
*
cabinet needs
to be 33" or
more from the
*
cooking
surface
Q
Backsplash
NOTES:
The space between
the cabinets
must be
30" wide and free of obstructions.
This microwave
oven is for installation
over
ranges
up to 33" wide.
If you are going to vent your microwave
oven to the outside,
see Hood Exhaust
Section for exhaust
duct preparation.
When installing
the microwave
oven
beneath
smooth
flat cabinets
be careful
to follow
the instructions
on the top
cabinet
template
for power cord
clearance.
7

Advertisement

Table of Contents
loading

Table of Contents