Outside Back Exhaust; Preparing Rear Wall For Outside Back Exhaust; Attach Mounting Plate To Wall - GE PVM1790 Installation Instructions Manual

Installation Instructions
OUTSIDE BACK
INSTALLATION OVERVIEW
B1. Prepare Rear Wall
B2. Attach Mounting Plateto Wall
B3. PrepareTop Cabinet
B4. Adjust Blower
B5. Mount the Oven
EXHAUST
(Horizontal
Duct)
I-_ PREPARING THE REAR WALL
FOR OUTSIDE BACK EXHAUST
You need to cut an opening in the rear wall for outside
exhaust.
• Read the instructions on the REARWALL TEMPLATE.
• Tape it to the rear wall, lining up with the holes
previouslg drilled for holes A and B in the wall plate.
• Cut the opening, following the instructions of the
REARWALLTEMPLATE.
ATTACH THE MOUNTING PLATE
TO TH E WALL
Attach the plate to the wall using toggle bolts. At least
one wood screw must be used to attach the plate to
a wall stud.
[]!_] Remove the toggle wings from the bolts.
[_] Insert the bolts into the mounting plate through
the holes designated to go into drgwall and reattach
the toggle wings to Y#' onto each bolt.
15