Tools You Will Need; Mounting Space - GE PVM1790 Installation Instructions Manual

Installation Instructions
TOOLS YOU WILL NEED
# 1 and#2 Phillipsscrewdriver
Tin snips(for cutting
damper,if required)
Gloves
Pencil
_J
Scissors
(to cut template, if necessary)
Saw (saber, h ole or keyhole)
Ruleror tapemeasure
aightedge
3 " 7 " Electricdrill with ,%6 , %6,
V£'andYs" drill bits
0
Studfinder er
Hammer (optional)
Carpentersquare
(optional)
Fillerblocksor scrap
wood pieces,if needed
for top cabinetspacing
(usedon recessedbottom
cabinet installationsonly)
Safetygoggles Level
Ductandmaskingtape
MOUNTING SPACE
13" max.
66" or more
from the floor
to the top of
the oven
Bottomedgeof
cabinetneedsto
be 30" or more
from the cooking
surface
Backsplash
NOTES:
• The space between the cabinets must be 30" wide
and free of obstructions.
• If the space between the cabinets is greater than
30", a Filler Panel Kit may be used to fill in the gap
between the oven and the cabinets. Your Owner's
Manual contains the kit number for your model.
• This oven is for installation over ranges up to
36" wide.
• If you are going to vent your oven to the outside,
see Hood Exhaust Section for exhaust duct
preparation.
° When installing the oven beneath smooth, flat
cabinets, be careful to follow the instructions
on the top cabinet template for power cord
clearance.
• The depth of the opening cannot be more than
13".
• The product should not be installed over any
cooktop or range with a combined BTUgreater
than 60000 BTU.