Adapting Blower For Recirculation - GE PVM1790 Installation Instructions Manual

Installation Instructions
I-_ ADAPTING BLOWER
FOR RECIRCULATION
NOTE:The exhaust adaptor with damper is not
needed for recirculating models. You mag want
to save them for possible future use.
[_ Remove and save screws that hold blower plate
to the oven.
,'_ _ Blower P lateScrews
i -
_ ......... jJ_ i
Back of
Oven
[_ Slide the blower plate from under its retaining
flange and lift it off. Remove and save screw that
holds the blower motor to oven.
Retaining __
Flange __ _ "_'_r--._. _,r
- __ _ _ Blower P late
Screw
[_ Carefullg pull out the blower unit. The wires
will extend far enough to allow gou to adjust
the blower unit.
[_ Roll the blower unit 90° so that fan blade openings
are facing toward the front of the oven.
Roll
NOTE:Make sure wires remain routed in the grooves
of the motor frame.
2O