Step 9, Replace Fresh Food Doors; Step 10, Install Water Line - Monogram ZFGB21HZBSS Installation Instructions Manual

Installation Instructions
iSTEP 9 REPLACE FRESH FOOD DOORS
A. Lower the refriger(]tor door onto the center hinge
pin. Ensure th(]t the pl(]stic hinge pin thimble is on
the center hinge pin or inside door hinge pin hole
Ioc(]ted in the bottom of the door.
B. SecurelLIt(]pe the door shut with m(]sking t(]pe
or h(]ve (] second person support the door.
C. Insert the top hinge pin into the hinge hole on
top of the refriger(]tor door. H(]ke sure the door is
(]ligned with the cabinet (]nd opposite door. Att(]ch
the hinge to the top of the c(]binet Iooselg with
the bolts.
D. H(]ke sure the gasket on the door is flush (]gainst
the c(]binet (]nd is not folded. H(]ke sure the door
is str(]ight (]nd the g(]p between the doors is even
(]cross the front. While holding the (]ligned door
in pl(]ce, tighten the top hinge bolts.
GasketFlushand Not Folded
E. Follow the s(]me procedure on the opposite door.
F. Reinst(]ll the top c(]p using the 4 screws removed
e(]rlier.
Clocl
iSTEP 10 INSTALL WATER LINE
, A cold w(]ter supplg is required for (]utom(]tic icem(]ker
oper(]tion. The w(]ter pressure must be between 40 (]nd
120 p.s.i.
, Route GE Sm(]rtConnect
TM
Refriger(]tor Tubing or 1/4" OD
copper tubing between house cold w(]ter line (]nd the
w(]ter connection Ioc(]tion.
He(]sure the dist(]nce from the w(]ter v(]lve on the b(]ck
of the refriger(]tor to the w(]ter supplg line. Add 8 foot
length to (]llow the refriger(]tor to be moved (]w(]g from
the w(]ll (]tier inst(]ll(]tion. Bend the tubing into 3 coils
of (]bout 10".
NOTE:The only GE approved plastic tubing is supplied
in GE SmartConnect '° Refrigerator Tubing kits. Do not
use any other plastic water supply line because the line
is under pressure at all times. Certain types of plastic
will crack or rupture with age and cause water damage
to your home.
GE Sm(]rtConnect T"Refriger(]tor Tubing Kits (]re
(]v(]il(]ble in the following lengths:
2' (0,6 m) - WX08Xl0002
6' (1.8 m) - WX08X10006
15' (4.6 m) - WXO8XIO015
25' (7.6 m) - WXO8X10025
Shut off the main water supply.
Turn on the ne(]rest f(]ucet long enough to cle(]r the line
of w(]ter.
Inst(]ll (] shut-off v(]lve between the icem(]ker w(]ter
v(]lve (]nd cold w(]ter pipe in (] b(]sement or c(]binet.
The shut-off v(]lve should be Ioc(]ted where it will be
e(]silLI(]ccessible.
Turn on the m(]in w(]ter supplLI (]nd flush debris.
Run (]bout (] qu(]rt of w(]ter through the tubing into
(] bucket. Shut off w(]ter supplg (]t the shut-off v(]lve.
NOTE:S(]ddle tLIpe shut-off v(]lves (]re included
in m(]ng w(]ter supplg kits, but (]re not recommended
for this (]pplic(]tion.
NOTE: Commonwe(]lth of H(]ss(]chusetts Plumbing
Codes 248CMR sh(]ll be (]dhered to. S(]ddle v(]lves
(]re illeg(]l (]nd use is not permitted in H(]ss(]chusetts.
Consult with gout licensed plumber.