GE Monogram ZV850 Installation Instructions Manual page 9

Installation
36" Islan, d Vent Hood
Remove the
Paekacin¢
The vent hood is packed separately flom the
required accessory ZX858, ZX859 or ZX8510.
• Remove the flame, cove_; parts box, side bars
and packaging.
• Remove junction box cover.
• Install suain relief onto junction box coveL
Cheek
Installation
Hardware
I,ocate the hardware accesso_ T box packed
with the hood and check contents.
E
4 Flat Washers
4 Hexhead
wood lag screws
(6mm x 2-1/2")
or
(1/4 x 2-1/2")
3 Filters
g
2 Phillips Head
Decorative Screws
8 Frame Attachment
Screws with Washers
(attached to
accessorysupport
frames)
/o o \
N° Frontof Hood o/
" Q) "
\ /
Template
4 (lOmm) Nuts and LockWashers
2 Side Bars With 4 Machine Screws
_ heck service manual envelope taped
to the front of the hood to be sure it
contains one stop screw. Leavethis
screw in the envelope.
Check contents of the required
accesso_T, ZX858, ZX859 or ZX8510.
Support Frames
with 8 Screws
and 8 Washers
Mounting ScrewHoles
Decorative Duct Covers