Cooktop Burners - GE JGP328 Installation Instructions Manual

Installation Instructions
COOKTOP BURNERS
ASSEMBLING THE COOKTOP
BURNERS
The electrode of the spark igniter is exposed. Be
careful not to push any cooktop controls while the
top of the burner is removed.
Do not remove the top or touch the electrode
of any burner while another burner is turned on.
Electrical shock might result.
O0
Replace the burner head onto the burner
bose, making sure that the head is properly
oriented over the burner bose and the
electrode. IVloke sure to place
the correct burner head on the correct burner
bose and that the burner head sits level on
the burner bose. The burner heads ore not
interchangeable.
[]8
Place the burner
cops on the burner
heads, making sure
to place the correct
burner cop on the
correct burner
head. The burner
cops ore not
interchangeable.
IVloke sure that the
burner cops ore
properly seated on
the burner heads.
Burner cop properly seated
Burner cop not properly seated
[]
Hake sure the pins in
the burner heads
match the burner
bose indentutions
and that they ore
properly seated in
them by rotating the
heuds until they ore
level.
IVlokesure the slot in
the burner head
is positioned
over the
electrode.
The burner cup
has
three to four
pins. When
replacing the
cup, make
sure none of
the pins sits
in the stmbility
chamber.
Burner cop
Burner head
_ectrode
__Burner
Pin bose
indentations
Stobilit_
chamber _
Electrode
Burnerbose
Hake sure
the hole
in the burner
head assembly is
positioned over the
electrode and that
the burner head is
fully inserted inside
the burner base. A
small gap between
the base and head is
normal.
Burner cop
Burner head
ossembl i_
Electrode Burner
bose
lO