Tools and Materials Needed
TOOLS
NEEDED
Hammer
Tape Measure
Hole Saw
Slot Screwdriver
(..
Pipe Wrench
Phillips Screwdriver
Adjustable Wrench
T-20 Screw-
Wire Cutter
Wire Stripper
Level
MATERIALS
NEEDED
(Additional materials may be required to comply with local codes.)
,..z
Electrical Supply Cable - Minimum #14 AWG, 2 conductor, 1 ground, insulated
copper conductors rated 75°C or higher.
Hot Water Supply Line - Minimum 3/8" O.D. copper tubing or metal braided
dishwasher supply line.
Shut-off valve and fittings appropriate for hot water supply line (copper tubing/
compression fitting, or braided hose).
90 ° elbow with 3/8" N.RT. male threads on one leg, and sized to fit your water supply
line (copper tubing/compression
fitting, or braided hose) on the other leg.
Teflon brand tape or other pipe thread compound to seal plumbing connections.
UL listed conduit connector or strain relief.
2