Advertisement
If flame needs to be adjusted:
1. Loosen the lock screw on the air shutter located at the rear of
the broil burner.
2. Adjust the air shutter as needed.
3. Tighten lock screw.
To Replace:
1. Align the forward drawer notches with the notches in the
drawer glides on both sides. Place the rear alignment tabs into
the drawer glides on both sides.
A. Lock screw
B. Air shutter
4.
Press CANCEL/OFF when finished.
Remove all items from inside the warming drawer or premium
storage drawer, and allow the range to cool completely before
attempting
to remove the drawer.
To Remove:
1. Open the warming drawer or premium storage drawer to its
fully open position.
2.
Using a flat-blade screwdriver, gently loosen the warming
drawer or premium storage drawer from the glide alignment
notch and lift up the drawer alignment tab from the glide.
A
A. Drawer alignment tab
B. Drawer glide notch
2. Push the warming drawer or premium storage drawer in all the
way.
3. Gently open and close the warming drawer or premium storage
drawer to ensure it is seated properly on the glides on both
sides.
The storage drawer can be removed. Before removing, make sure
drawer is cool and empty.
To Remove:
1. Pull the storage drawer straight back to the drawer stop.
i
A
3.
A. Flat-blade screwdriver
B. Drawer alignment
tab
C. Drawer glide notch
Repeat Step 2 on the other side. The warming drawer or
premium storage drawer is no longer attached to the drawer
glides. Using both hands, pick up the warming drawer or
premium storage drawer to complete the removal.
2.
A. Drawer stop notch
Lift up the front of the drawer and pull the drawer out.
12
Advertisement
