Jenn-Air JGD8130 Installation Manual page 6

TO CONVERTAPPLIANCEFOR USE WITH PROPANEGAS
Natural Gas To Propane Gas (LP) ConversionInstructions
A WARNING
Propane Gas conversion is to be performed by a
Jenn-Air Authorized Service Contractor (or other
qualified agency) in accordance with the
manufacturer's instructions and all codes and
requirements of the authority having jurisdiction.
Failure to follow instructions could result in serious
injury or property damage. The qualified agency
performing this work assumes responsibility for this
conversion.
Models - JGD8130 & JGD8345 Series
A WARNING
ELECTRICALPOWER AND GAS MUST BE
TURNED OFF PRIORTO CONVERSION
@
\
Manifold - Propane Gas pressure required - 10" W.C.
Incoming Propane Gas pressure required to appliance
pressure regulator- 11" - 12" W.C.
Propane Gas conversion orifice hoods are supplied with
these models.
Propane Gas input specified - JGD8130/JGD8345 -
33,000 BTU/hr / 51,000 BTU/hr.
TIE DOWN
BOLTON
EACHEND
GREASE
CONTAINER
REGULATOR
BLOWERCAN BE
(_ SWIVELED90"
JGD8345 (Shown)
Left Rear (LR) 7,500 #66 .0330 Zinc
Left Front (LF) 7,500 #66 .0330 Zinc
Right Rear (RR) 9,000 #63 .0370 Blue
Right Front (RF) 9,000 #63 .0370 Blue
Center Rear (CR) 9,000 #63 .0370 Blue
Center Front (CF) 9,000 #63 .0370 Blue