Berco 700527-2 Owner's Manual page 9

For the 42'' mower deck only: Remove the mower
deck stopper and keep in safe place.
NOTE: Remove tractor bolt (A) from under the foot rest
pad as shown.
Remove tractor bolt (B) from underneath the foot rest.
Keep the bolts in a safe place for future installation.
Install handle support (item 4).
Item # Description
1 Carriage bolt
5/16''n.c. x 1 1/2''
2 Flat washer
3 Sleeve
4 Handle support
5 Flange nut
5/16'' n.c.
6 Carriage bolt
5/16'' n.c. x 3/4''
7 Flange nut
5/16'' n.c
8 Plastic grommet
9 Square head set
screw
5/16'' n.c. x 1/2''
NOTE: Tighten firmly all the nuts. Put the pad of the
foot rest in place.
* Do not use if there is a rubber bushing.
Install the left & right braces (items 1 & 2) on each
side of the vehicle.
Item # Description
1 & 2 Left & right brace
(qty 2)
3 Hex bolt
3/8'' n.c. x 1''
(qty 4)
4 Nylon insert lock nut
3/8''
(qty 4)
NOTE: Tighten firmly the hex. bolts (item 5) on both
sides.
ASSEMBLY
Action
Insert as shown.
Install as shown on
bolt.
Insert on the bolt as
shown. *
Insert on the bolt as
shown
Do not tighten.
Insert as shown.
Tighten firmly.
Insert as shown.
Insert as shown.
Action
Install on the inside
as shown.
Insert the bolts as
shown (one inside
the other outside).
Insert on the bolts as
shown.
Tighten firmly.
7
Install handle support
Install the braces