Soft Key:counter - Setra Systems Super II User Manual

Soft Key:
COUNTER
Setting a Print Counter for Box Counting or Serial Number Generation
The scale has the capability of keeping track of a counter each time the PRINT key is used. This counter can
be used to generate sequential numbers for box or package labeling during kitting operations or to
generate a sequential serial number for a label.
To enter the beginning and ending values of a printing sequence, follow the steps below:
1. Press the menu hard key, followed by the MORE soft key. The soft keys change to the following:
tare
menu
abc
2. Press the COUNTER soft key and the soft keys change to the following:
3. To enter values for the X unit and Y unit (X being the beginning number in the sequence and Y being the ending number),
type in the desired number using the numeric keypad followed by the appropriate soft key for the X or Y position. The X and Y
counters are limited to 10 numeric characters each.
4. To return to the default User Menu, press the EXIT soft key.
5. The X and Y values will remain in memory until X equals Y at which time they will reset to Ø. The counter can also be
deactivated by entering Ø for the X and Y values following steps 1 - 3 above.
NOTES:
a. You do not need to enter a value for X if 1 is the first value in your sequence.
b. Y must be greater than X.
c. You may not enter negative numbers.
34
Select Menu Option:
OK!
MORE SET PTS
remote
reset
X: 0
Enter the desired X and Y limits
followed by the X and Y key.
X UNIT Y UNIT
0.00
UNITS COUNTER SET UPS
Y: 0
GO BACK EXIT
Base 1
Base 1
Pieces
Grams
EXIT
User Functions Super II
•