Soft Key:datbase - Setra Systems Super II User Manual

Soft Key:
DATBASE
Viewing, Recalling, Changing and Deleting Information in the Database
After having set up the format of the database that you would like to use (see DATBASE SETUP soft key in
the "Supervisor and Technical Setups" manual), the database is available for changes, additions, deletions
or viewing any of the records that are stored in the database unless protected (see SECURTY soft key in
the "Supervisor and Technical Setups" manual). To access the database records, follow the steps below:
1. Press the menu hard key on the controller; the soft keys will change to:
tare
menu
abc
2. Press the DATBASE soft key; the soft keys then change to:
NEW
To add a new database record , type in the PART ID using the numeric or alphanumeric keypad (abc key)
and press the NEW softkey. Enter Part ID, press ACCEPT. Press the DOWN and UP keys to select fields and
enter data. When complete, press SAVE. Press CLEAR to clear that field. To quit without saving changes,
press QUIT.
LIST
To view records in the database for selection, editing, or deletion, either press the LIST soft key to go to the
beginning of the database or type any portion of the PART ID using the numeric or alphanumeric keypad
(abc key), then press LIST to go directly to that record.
1. The display will show the next 4 records in numerical/alphabetical order that most closely match the PART ID and show the
variable field information for the database format chosen in the DATBASE SETUP selections of the Supervisor Menu. The
display and soft keys change to the following:
28
S e l e c t Me nu O p t io n :
OK!
SAVE
ACCUM DISPLAY DATBASE
remote
reset
Enter the PART ID below:
NEW
ID
PRIOR NEXT
RECORD RECORD
0.00
Base 1
Base 1
Pieces
Grams
MORE
LIST
EXIT
APW TARE
VIEW/
ACCEPT GO BACK
EDIT
User Functions Super II
•