Managing System; Upgrading The System Firmware; Restoring Default Settings - HIKVISION DS-8100HDI-S Series User Manual

Managing System

Upgrading the System Firmware

The system firmware for your DVR can be updated from a USB storage device.
To update the system firmware:
Enter the Firmware Upgrade menu, shown in Figure 59 by going to Main Menu > Maintenance > Firmware
Upgrade.
1.
Connect the USB storage device to a USB port on the DVR.
Click the Refresh button. The contents of the USB storage device will be shown on the screen.
Select the firmware file. The firmware file is named digicap.mav.
2.
Click the Upgrade button to upgrade the DVR. The DVR will automatically reboot after the upgrade is completed.
3.
If you do not wish to upgrade at this point, click the Cancel button.
4.
5.

Restoring Default Settings

To restore factory default settings to your DVR:
Enter the Factory Default menu, shown in Figure 60 by going to Main Menu > Maintenance > Factory Default.
1.
Figure 59. Firmware Upgrade Menu
Figure 60. Factory Default Menu
67