Checking Operation - Kenmore 79098059002 Installation Instructions Manual

30" electric range
Table of Contents

Advertisement

Available languages

Available languages

Direct
Electrlcal
Connection
to the Circuit
Breaker,
Fuse Box or Junction
Box
If the appliance
is connected
directly
to the circuit
breaker,
fuse box or junction
box, use flexible,
armored
or nonmetallic
sheathed
copper
cable
(with grounding
wire).
Supply
a U.L. listed strain-relief
at each end
of the cable.
At the appliance
end, the cable
goes
through
the Direct
Connection
Hole (see Figure 8) on
the Cord Mounting
Plate. Wire
sizes (copper
wire
only)
and connections
must conform
to the rating
of the
appliance.
Where
local codes permit connecting
the appllance-
grounding
conductor
to the neutral (white)
wire
(see
Figure 9):
1. Be sure that no power is supplied
on the cable
from
residence.
2. Follow instructions
on previous
page for Four
Conductor
Wire
Connection
to Range (Fig. 8).
3. In the circuit
breaker,
fuse box or junction
box (Fig.
9):
a) Connect
the green
(or bare copper)
wire, the
white
appliance
cable
wire, and the neutral
(white)
wire together.
b) Connect
the 2 black
wires together.
c) Connect
the 2 red wires together.
Cable
from
Residence
Neutral
(white)
Wire
_-
_-_ . ...... _"_I
Wires
Green _
_i_
(or Bare Copper)
Wire
Cable from
Appliance
NOTE:
Be sure to remove
the
supplied
grounding
strap.
Black
Wires
4-------
Junction
Box
J
\ White Wire
U.L.-tisted
Conduit
Connector
(or CSA listed)
Figure 9
3-Wire (Grounded
Neutral)
Electrical System (Example:
Junction
Box)
Where
local codes DO NOT permit connecting
the
appllance-groundlng
conductor
to the neutral
(white)
wire, or if connecting
to 4-wlre
electrlcal
system
(see
Figure 10):
1.
Be sure that no power is supplied
on the cable
from
residence.
2.
Follow
instructions on previous
page
for Four
Conductor
Wire
Connection
to Range (Fig. 8).
3.
In the circuit
breaker,
fuse box or junction
box (Fig.
10):
a) Connect
the white appliance
cable wire to the
neutral
(white)
wire.
b) Connect
the 2 black wires together.
c) Connect
the 2 red wires together.
d) Connect
the green (or bare copper)
grounding
wire to the grounding
wire of the circuit
breaker,
fuse box or iunction
box.
Cable
from
Residence
Bare
Black
_
Wires
]
Green
(or Bore
-L_:_.
_
,,,,.
__.
, _
Copper)
Wire
/
_
ite Wire
Junction
_U.L.-listed
Conduit
/
Box
Connector (or CSA
Cable from
listed)
Appliance
NOTE:Be sureto remove the
supplied
grounding
strap.
Figure IO - 4-Wire
Electrical System
(Example:
Junction
Box)
7. Checking
Operation
Refer to the Use and Care Guide for operation.
Do not touch
cooktop
glass or elements.
They may be hot enough
to burn you.
Before
You Call for Service
Read the Before You Caii for Service Checklist
and
operating
instructions in your Use and Care Guide.
It may save you time and expense.
The list includes
common
occurrences
that
are not the result of defective
workmanship
or materials
in this appliance.
Refer to your Use and Care Guide for Sears service
phone
numbers,
or caii lmgOO-4-MYmHOME
®.

Advertisement

Table of Contents
loading

Table of Contents