Installation - Kenmore 253 Use & Care Manual

This Owner's Guide provides specific operating
instructions for your model. Use the refrigerator only as
instructed in this Use & Care Manual. Before starting the
refrigerator, follow these important first steps.
LOCATION
• Choose a place that is near a grounded electrical outlet.
Do Not use an extension cord or an adapter plug.
• If possible, place the refrigerator out of direct sunlight
and away from the range, dishwasher or other heat
sources.
• The refrigerator must be installed on a floor that is level
and strong enough to support a fully loaded refrigerator.
• Consider water supply availability for models equipped
with an automatic ice maker.

INSTALLATION

CAUTION CAUTION CAUTION CAUTION CAUTION
Do Not install the refrigerator where the
temperature will drop below 55°F (13°C) or rise
above 110°F (43°C). The compressor will not be
able to maintain proper temperatures inside the
refrigerator.
Do Not block the toe grille on the lower front of your
refrigerator. Sufficient air circulation is essential for
the proper operation of your refrigerator.
Installation Clearances
• Allow the following clearances for ease of installation,
proper air circulation, and plumbing and electrical
connections:
Sides & Top --------------- 3/8"
Back ------------------------ 1"
DOOR OPENING
N O T E N O T E N O T E
N O T E N O T E
If you refrigerator is placed with the door hinge side
against a wall, you may have to allow additional space
so the door can be opened wider.
Your refrigerator should be positioned to allow easy access
to a counter when removing food. For best use of drawers
and freezer baskets, the refrigerator should be in a
position where both the refrigerator and freezer doors can
be fully opened.
Installation
TOE GRILLE INSTALLATION / REMOVAL
1 Open both doors and remove the toe grille by
unscrewing its two mounting screws and gently pulling
forward (see illustration).
2 Replace the toe grille by fitting it into place and
refastening its mounting screws.
LEVELING
All four corners of your refrigerator must rest firmly on a
solid floor. Your refrigerator is equipped with adjustable
front rollers to help level your unit. To ensure proper door
seal and assist door closing, the refrigerator should be
tilted 1/4" (6 mm), front to back.
To Level Your Refrigerator:
1. Remove toe grille.
2. Use flat-blade screwdriver or 3/8" socket wrench
to adjust front rollers.
N O T E N O T E N O T E
N O T E N O T E
The refrigerator doors are designed to shut by
themselves within a 20 degree opening.
3. Check both doors to be sure seals touch cabinet on all
four sides.
5