Remote Management; Factory Defaults; Reboot; Backup - Netis WF-2403 User Manual

3.13.6. Remote Management

WEB Management Status: the default is disable. Router can be accessed on the remote site
using "Web setup". Check the "Management Port" and enter the port number and then press
"save" button to enable web management.

3.13.7. Factory Defaults

Click "Restore" button, the Router will erase all of your settings and replace them with the
factory defaults, make sure you have backup current settings before click this button.

3.13.8. Reboot

Click "Reboot" button to restart the router.

3.13.9. Backup

Click "Backup Parameter " button to backup system parameter as a file. you can recovery
Portable Wireless-N Router/AP User Manual
Figure 3-59
Figure 3-60
Figure 3-61
Figure 3-62
45